Gabaɗaya
Umarni zai taimaka wa mai amfani don yin aiki da kayan aiki lafiya, daidai, sannan ta mafi kyawun rabon amfani da farashi.Yin aiki da kayan aiki bisa ga umarninsa zai hana haɗari, rage kuɗin kulawa da lokacin rashin aiki, watau inganta tsaro da ƙare lokacin juriya.
Dole ne umarni ya haɗa wasu ƙa'idodi waɗanda ƙayyadaddun ƙasashe suka bayar game da rigakafin haɗari da kariyar muhalli.Dole ne mai amfani ya sami umarni kuma dole ne masu aiki su karanta shi.A hankali kuma ku kasance daidai da shi yayin aiki da wannan kayan aikin, misali tsari, kulawa (Dubawa da gyarawa) da jigilar kaya.
Ban da ƙa'idodin da ke sama, a halin yanzu, ƙa'idodin fasaha na gaba ɗaya game da aminci da aiki na yau da kullun dole ne a bi su.
Garanti
Kafin aiki, sanin wannan umarnin ya zama dole.
Tsammanin za a yi amfani da wannan kayan aikin daga amfanin sa da aka ambata a cikin umarnin, ba za mu ɗauki alhakin amincin sa yayin aiki ba.
Wasu lokuta ba za su kasance bisa garantin mu kamar haka:
rashin daidaituwa ya haifar da aiki mara kyau
rashin daidaituwa ya haifar da rashin kulawa
rashin daidaituwa ya haifar ta hanyar amfani da ƙarin abin da bai dace ba
rashin daidaituwa ya haifar da rashin amfani da kayan gyara na asali da muka kawo
rashin daidaituwa ya haifar da canza tsarin samar da iskar gas ba bisa ka'ida ba
Ba za a faɗaɗa orange ramuwa ta yau da kullun ba
ta al'amuran da aka ambata a sama.
Ƙayyadaddun Ayyukan Aminci
hadari
Dole ne a bi ƙa'idodin aiki sosai.
Gyaran fasaha
Muna adana haƙƙin mu don gyara fasahar don
wannan injin amma ba don sanar da mai amfani ba yayin aikin haɓaka fasahar samfur.
A. Hankali ga shigarwa
(A).Standard Bukatar wannan na'urar bushewa: Ba a buƙatar kullin ƙasa amma tushen dole ne ya kasance a kwance da ƙarfi, wanda kuma ya kamata ya shafi tsayin tsarin magudanar ruwa da tashar magudanar ruwa.
(B) Nisa tsakanin na'urar busar da iska da sauran injuna bai kamata ya zama ƙasa da mita ɗaya ta hanyar aiki da kulawa da dacewa ba.
(C) An hana bushewar iska a wajen gini ko wasu wuraren da ke da hasken rana kai tsaye, ruwan sama, yawan zafin jiki, rashin samun iska, kura mai nauyi.
(D) Yayin da ake hadawa, wasu nisantar kamar haka: bututun mai tsayi da yawa, da yawan gwiwar hannu, ƙaramin bututu don rage faɗuwar matsa lamba.
(E) A mashigin shiga da mashigar, bawul ɗin kewayawa ya kamata su kasance da kayan aiki da yawa don dubawa da kiyayewa yayin cikin matsala.
(F) Hankali na musamman ga ikon na'urar busar da iska:
1. Rated ƙarfin lantarki ya kamata a cikin ± 5％.
2. Girman layin kebul na lantarki dole ne ya shafi ƙimar halin yanzu da tsayin layi.
3. Dole ne a ba da wutar lantarki ta musamman.
(G) Dole ne a haɗa ruwan sanyaya ko keken keke.Kuma matsa lamba ba dole ba ne ya zama ƙasa da 0.15Mpa, zafinsa bai wuce 32 ℃ ba.
(H) A shigar da na'urar busar da iskar, ana ba da shawarar a samar da matatar bututun mai wanda zai iya hana ƙaƙƙarfan ƙazanta waɗanda girman bai gaza 3μ da mai daga gurɓata saman bututun jan ƙarfe na HECH ba.Wannan shari'ar na iya rinjayar ikon musayar zafi.
(I) Ana ba da shawarar sanya na'urar busar da iskar ta biyo bayan na'urar sanyaya baya da tankin iskar gas akan aikin don ɓata zafin shigar da na'urar busar da iska.Da fatan za a kula da kayan aikin busar da iska da shekarun aiki.Tsammanin kowace matsala da shakku, kada ku yi shakka ku neme mu.
B. Abubuwan da ake buƙata don daskarewa Nau'in Drier.
Yana da matukar mahimmanci don kula da na'urar bushewa.Yin amfani da kyau da kulawa na iya ba da garantin busar iska don cika amfani da shi amma kuma lokacin juriya na ƙarshe.
(A) Kula da saman na'urar busar da iska:
Yana nufin tsaftacewa a wajen na'urar busar da iska.Yayin yin hakan, gabaɗaya tare da rigar rigar farko sannan ta bushe bushe.Don fesa shi da ruwa kai tsaye ya kamata a guji .In ba haka ba kayan lantarki da na'urori na iya lalata ruwa kuma za'a kunna rufewar sa.Bugu da kari, babu man fetur ko wasu man da ba za a iya jurewa ba, za a iya amfani da wasu sinadarai masu sirara don tsaftacewa.Ko kuma, waɗancan jami'ai za su ɓata launi, lalata saman kuma su ɓata hoton.
(B) Kulawa don magudanar ruwa ta atomatik
Ya kamata mai amfani ya bincika yanayin magudanar ruwa kuma ya cire dattin da ke manne da aikin tacewa don hana toshe magudanar ruwa da kasa zubarwa.
Sanarwa: Suds ko wakili mai tsaftacewa kawai za a iya amfani dashi don tsaftace magudanar ruwa.An haramta amfani da man fetur, toluene, ruhohin turpentine ko wasu ɓarna.
(C) Da ace an samar da ƙarin magudanar ruwa, mai amfani ya kamata ya zubar aƙalla sau biyu a kullum a lokacin da aka saita.
(D) Ciki mai sanyaya iska, tazara tsakanin biyu
ruwan wukake shine kawai 2 ~ 3mm kuma a sauƙaƙe don toshe shi da ƙura a cikin iska,
wanda zai rikitar da zafin rana.A wannan yanayin, mai amfani ya kamata
fesa shi gabaɗaya ta matsewar iska ko goge shi da goga na jan karfe.
(E) Kula da nau'in tacewa mai sanyaya ruwa:
Tace ruwa zai hana tsattsauran ƙazanta shiga cikin na'ura da kuma ba da garantin kyakkyawar musayar zafi.Ya kamata mai amfani ya tsaftace aikin tacewa na lokaci-lokaci don kada ya sa ruwa ya yi mugun zagayowar kuma zafi ya kasa haskakawa.
(F) Kula da sassan ciki:
A lokacin rashin aiki, mai amfani ya kamata ya tsaftace ko tattara ƙura na ɗan lokaci.
(G) Kyakkyawan samun iska yana da mahimmanci a kusa da wannan kayan aiki a kowane lokaci kuma ya kamata a hana bushewar iska daga fallasa a cikin hasken rana ko tushen zafi.
(H) A lokacin aikin kulawa, ya kamata a kiyaye tsarin na'urar sanyaya da kuma jin tsoron rushewa.
Shafi daya Chart na biyu
※ Jadawalin kwatancen Tsaftacewa guda ɗaya don masu sanyaya a cikin
baya na daskarewa Type Drier wuraren tsaftacewa don magudanar ruwa ta atomatik:
Kamar yadda aka nuna a cikin ginshiƙi, kwakkwance magudanar ruwa a tsoma shi
a cikin suds ko mai tsaftacewa, goge shi da goga na jan karfe.
Tsanaki: Gasoline, toluene, ruhohin turpentine ko wasu ɓarna an hana amfani dasu yayin aiwatar da wannan matakin.
※ Chart biyu Water tace kwatankwacin kwatancin
C. Jerin daskarewa Nau'in Drier tsarin aiki
(A) Yi jarrabawa kafin farawa
1. Bincika idan wutar lantarki ta al'ada ce.
2. Duba tsarin refrigerant:
Dubi ma'auni mai girma da ƙananan matsa lamba akan refrigerant wanda zai iya kaiwa ma'auni a madaidaicin matsi wanda za'a iya canzawa ta wurin zafin jiki, yawanci yana kusan 0.8 ~ 1.6Mpa.
3. Dubawa idan bututun ya zama al'ada.Matsalolin iska bai kamata ya zama sama da 1.2Mpa (sai dai wani nau'i na musamman) kuma zafinsa bai kamata ya wuce ƙimar da aka saita ba yayin zaɓar wannan nau'in.
4. Ana tsammanin ana amfani da nau'in sanyaya ruwa, da kyau to mai amfani ya kamata ya duba idan ruwan sanyi zai iya gamsar da buƙatun.Its matsa lamba ne 0.15Mpa ~ 0.4Mpa da zazzabi ya zama kasa da 32 ℃.
(B) Hanyar Aiki
Ƙayyadaddun tsarin kula da kayan aiki
1. Babban ma'aunin ma'auni wanda zai nuna ƙimar matsa lamba don refrigerant.
2. Ma'aunin ma'aunin fitar da iska wanda zai nuna ƙimar matsewar iska a wurin wannan na'urar bushewa.
3. Maɓallin tsayawa.Lokacin danna wannan maɓallin, wannan injin na'urar bushewa zai daina aiki.
4. Maɓallin farawa.Danna wannan maɓallin, za a haɗa wannan na'urar bushewa da wuta kuma fara aiki.
5. Hasken nunin wuta (Power).Yayin da yake haske, yana nuna cewa an haɗa wutar lantarki tare da wannan kayan aiki.
6. Hasken nuni na aiki (Run).Yayin da yake haske, yana nuna wannan na'urar bushewa tana gudana.
7. High-low matsa lamba kariya on-kashe nuni haske ga
firiji.(Ref HLP).Yayin da yake haske, yana nuna hakan
An saki kariya kan kashewa da wannan kayan aiki
a daina gudu a gyara.
8. Nuni haske yayin da ake yin nauyi (OCTRIP) .Lokacin da shi
haske ne, yana nuna compressor yana aiki a halin yanzu
overload, don haka an saki relay mai yawa kuma wannan
ya kamata a daina gudu da kuma gyara kayan aiki.
(C) Tsarin Aiki na wannan FTP:
1. Kunna kunnawa, kuma hasken nunin wutar lantarki zai yi ja akan kwamitin kula da wutar lantarki.
2. Idan ana amfani da nau'in sanyaya ruwa, ya kamata a buɗe bawul ɗin shigarwa da magudanar ruwa don sanyaya ruwa.
3. Latsa maɓallin kore (START), hasken aikin nuni (Green) zai zama haske.Compressor zai fara aiki.
4. Bincika idan aikin kwampreso yana cikin kayan aiki, watau idan ana iya jin wasu ƙararrakin da ba na al'ada ba ko kuma alamar ma'aunin ƙananan matsa lamba yana da daidaito sosai.
5. Idan aka ɗauka komai na al'ada ne, buɗe compressor da bawul ɗin shigarwa da fitarwa, iska za ta gudana cikin na'urar bushewa sannan a rufe bawul ɗin wucewa.A wannan lokacin ma'aunin nunin iska zai nuna matsa lamba na iska.
6. Watch for 5 ~ 10 minutes, da iska bayan da aka bi da ta iska bushewa iya saduwa ta amfani da bukata lokacin da low-matsa lamba ma'auni a kan refrigerant zai nuna matsa lamba ne ：
R22: 0.3 ~ 0.5 Mpa da ma'aunin matsi mai ƙarfi zai nuna 1.2 ~ 1.8Mpa.
R134a: 0.18 ~ 0.35 Mpa da ma'aunin ƙarfinsa zai nuna 0.7 ~ 1.0 Mpa.
R410a: 0.48 ~ 0.8 Mpa da ma'aunin matsi mai ƙarfi zai nuna 1.92 ~ 3.0 Mpa.
7. Bude bawul ɗin jan ƙarfe na duniya akan magudanar ruwa ta atomatik, inda bayan daɗaɗɗen ruwan da ke cikin iska zai gudana cikin magudanar kuma za a sauke.
8. Ya kamata a fara rufe tashar jirgin sama lokacin da aka daina gudanar da wannan kayan aiki, sannan danna maɓallin STOP don kashe na'urar bushewa da yanke wutar lantarki.Bude bawul ɗin magudanar ruwa sannan kuma a zubar da ruwa gaba ɗaya.
(D) Kula da wasu ci gaba yayin da na'urar bushewa ke kan aiki:
1. Hana na'urar busar da iska daga gudu na dogon lokaci ba tare da wani kaya ba kamar yadda zai yiwu.
2. Hana farawa da dakatar da na'urar busar da iska cikin kankanin lokaci saboda fargabar damfara ta lalace.
D、 Binciken matsala na al'ada da sasantawa don na'urar bushewa
Matsalolin bushewar daskarewa galibi suna wanzuwa a cikin da'irar lantarki da tsarin firiji.Sakamakon waɗannan matsalolin shine tsarin rufewa, rage ƙarfin firiji ko lalacewar kayan aiki.Don gano inda matsala ta kasance daidai da ɗaukar matakan aiki da suka shafi ka'idodin injin firiji da na lantarki, wani abu mafi mahimmanci shine gogewa a aikace.Wasu matsaloli na iya haifar da dalilai da yawa da farko na bincika kayan firij ta hanyar synthetically don nemo mafita.Bugu da ƙari, wasu matsaloli suna haifar da rashin amfani ko kulawa da kyau, wannan ana kiransa matsala "ƙarya", don haka hanyar da ta dace don gano matsalar shine aiki.
Matsalolin gama gari da matakan zubar dasu sune kamar haka:
1. A iska bushewa ba zai iya aiki:
Dalili
a.Babu wutar lantarki
b.kewaye fius narke
c.An katse waya
d.Waya ta saki
zubarwa:
a.Duba wutar lantarki.
b.maye gurbin fuse.
c.Nemo wuraren da ba a haɗa su ba kuma a gyara shi.
d.haɗi tam.
2. Compressor ba zai iya aiki ba.
Dalili
a .Ƙananan lokaci a cikin samar da wutar lantarki, rashin wutar lantarki mara kyau
b.Mummunan lambobin sadarwa, ba a sanya wutar lantarki ta hanyar ba
c.Babban & ƙananan matsa lamba (ko ƙarfin lantarki) matsalar canjin kariya
d.Matsala mai karewa fiye da zafi ko fiye da nauyi
e.Cire haɗin waya a cikin tashoshi masu sarrafawa
f.Matsalolin injina na kwampreso, kamar madaidaicin silinda
g.Da ace an fara compressor ta capacitor, tabbas capacitor ya lalace.
zubarwa
a.Duba wutar lantarki, sarrafa wutar lantarki a daidai ƙarfin lantarki
b.Sauya lambar sadarwa
c.Daidaita saita ƙimar wutar lantarki, ko maye gurbin lalacewa mai lalacewa
d.Sauya mai kariyar zafi ko fiye da kaya
e.Nemo tashoshin da aka cire kuma sake haɗa su
f.Sauya compressor
g.Sauya fara capacitor.
3. The refrigerant high matsa lamba ne ma high dalilin matsa lamba
canjawa saki (REF H, L, P, TRIP nuna alama yana ci gaba)
Dalili
a.Yanayin iska mai shigowa ya yi yawa
b.Musanya zafi na na'urar sanyaya iska ba ta da kyau, ƙila ta haifar da rashin isasshen ruwan sanyi ko rashin samun iska.
c.Yanayin zafin jiki ya yi yawa
d.Cike da firiji
e.Gases suna shiga cikin tsarin firiji
zubarwa
a.Inganta musayar zafi na mai sanyaya baya don rage zafin iska mai shigowa
b.Tsaftace bututu na na'ura da tsarin sanyaya ruwa da kuma ƙara yawan hawan keke mai sanyi.
c.Inganta yanayin samun iska
d.Fitar da ragi mai sanyi
e.Ka sake kwashe na'urar refrigeren, cika wasu firiji.
4. The refrigerant low matsa lamba ne ma low kuma haifar da matsa lamba canji saki (REF H LPTEIP nuna alama ci gaba).
Dalili
a.Babu matsatsin iska da ke gudana na ɗan lokaci
b.Ƙananan kaya
c.Bawul ɗin wucewar iska mai zafi baya buɗe ko mara kyau
d.Rashin isassun firji ko zubewa
zubarwa
a.inganta yanayin amfani da iska
b.Ƙara yawan iska da nauyin zafi
c.Daidaita bawul ɗin wucewar iska mai zafi, ko maye gurbin bawul mara kyau
d.Cika firiji ko nemo wasanni masu yabo, gyarawa da sharewa sau ɗaya, sake cika firij.
5. Aiki na yanzu yana da yawa, yana haifar da matsananciyar zafi fiye da zafin jiki da kuma sakewar zafi mai zafi (O,C, TRIP nuna alama yana ci gaba)
Dalili
a.sama da nauyin iska mai nauyi, mummunan samun iska
b.Maɗaukakin yanayin zafin jiki da rashin samun iska
c.Ya yi yawa babban gogayya na inji na kwampreso
d.Rashin isasshen firiji yana haifar da zafin jiki
e.Over lodi ga compressor
f.Mummunan lamba don babban abokin hulɗa
zubarwa
a.Rage nauyin zafi da zafin iska mai shiga
b.Inganta yanayin samun iska
c.Sauya man shafawa ko kwampreso
d.Cika firiji
e.Rage lokacin farawa & tsayawa
6. Ruwa a cikin evaporator ya daskare, wannan bayyanar ita ce
babu wani aiki na magudanar atomatik na dogon lokaci.
Sakamakon haka lokacin da aka buɗe bawul ɗin sharar gida, akwai kankara
barbashi sun busa.
Dalili
a.Ƙaramar iska, ƙarancin zafi.
b.Ba a buɗe bawul ɗin iska mai zafi ba.
c.Shigar da injin fitar da ruwa ya cika da yawa da kuma tattara ruwa da yawa, saboda haka ɓangarorin ƙanƙara sun zubar kuma suna sa iska ta yi mugun gudu.
zubarwa
a.Ƙara yawan kwararar iska.
b.Daidaita zafi iska kewaye bawul.
c.Cire magudanar ruwa da zubar da sharar gaba daya
ruwa a cikin condenser.
7. Alamun raɓa ya yi yawa
Dalili
a.Yanayin iska mai shigowa ya yi yawa
b.Yanayin yanayi ya yi yawa
c.Mugunyar zafi mai zafi a cikin tsarin sanyaya iska, na'urar ta shake;a cikin tsarin sanyaya ruwa kwararar ruwa bai isa ba ko kuma zafin ruwa ya yi yawa.
d.Fiye da yawan iska amma akan ƙananan matsi.
e.Babu kwararar iska.
zubarwa
a.Inganta zafin rana a cikin mai sanyaya baya da ƙananan zafin iska mai shiga
b.Ƙananan zafin jiki
c.Don nau'in sanyaya iska, tsaftace na'urar
Game da nau'in sanyaya ruwa, cire furring a cikin na'urar
d.Inganta yanayin iska
e.Inganta yanayin amfani da iska don kwampreso
f.Sauya ma'aunin raɓa.
8. Yawan matsa lamba don matsewar iska
Dalili
a.Tace bututun ya shake.
b.Ba a buɗe bawul ɗin bututun gabaɗaya
c.Ƙananan bututun mai girma, da yawan gwiwar hannu ko bututun mai tsayi da yawa
d.Ruwan da aka daskare ya daskare ya haifar da iskar gas
bututu da za a cushe a cikin evaporator.
zubarwa
a.Tsaftace ko maye gurbin tacewa
b.Buɗe duk bawuloli waɗanda iska dole ne su gudana ta
c.Meliorate iska kwarara tsarin.
d.Bi kamar yadda aka ambata a sama.
9. Nau'in na'urar busar daskarewa na iya gudana akai-akai yayin da ba shi da inganci.
Yawancin saboda yanayin da aka canza ya haifar da yanayin tsarin refrigerating ya canza kuma yawan kwarara ya fita daga kewayon tsari na bawul ɗin faɗaɗawa.Anan ya zama dole don daidaita shi da hannu.
Lokacin daidaita bawuloli, kewayon juyawa zai zama kaɗan da 1/4-1/2 da'irar a lokaci ɗaya.Inda bayan yi amfani da wannan kayan aikin na tsawon mintuna 10-20, duba aikin kuma da shi don yanke shawarar ko ana buƙatar gyara kuma.
Kamar yadda muka sani cewa na'urar bushewa tsari ne mai rikitarwa wanda ya ƙunshi manyan raka'a hudu da kayan haɗi da yawa, waɗanda ke da tasiri ga juna.Ta haka idan matsala ta faru, ba za mu mai da hankali ga bangare ɗaya kawai ba amma kuma mu bincika gabaɗaya da bincike don kawar da abubuwan da ake tuhuma mataki-mataki kuma a ƙarshe gano dalilin.
Bugu da ƙari, lokacin da ake yin gyare-gyare ko ayyukan kulawa don na'urar busar da iska, mai amfani zai kula da hana tsarin na'ura daga lalacewa, musamman lalacewa ga tubes na capillary.In ba haka ba ruwan firji na iya haifar da shi.
CT8893B Sigar Jagorar Mai Amfani: 2.0
1 Fihirisar Fasaha
Zazzabi nuni kewayon: -20～100℃（Mai ƙuduri shine 0.1℃)
Wutar lantarki: 220V± 10%
Na'urar firikwensin zafin jiki: NTC R25=5kΩ,B(25/50)=3470K
2 Jagorar Aiki
2.1 Ma'anar fitilun fihirisa akan panel
Hasken Fihirisar Suna Haske Flash
Refrigerating Refrigerating Shirye don refrigerate, a cikin yanayin damfara fara jinkiri pro
Masoya Fanning -
Defrosting Defrost -
Ƙararrawa - Yanayin ƙararrawa
2.2 Ma'anar nunin LED
Siginar ƙararrawa zai canza yanayin zafin nuni da lambar faɗakarwa.(A xx)
Don soke ƙararrawa na buƙatar cajin mai sarrafawa.Nuna code kamar haka:
Ma'anar Code Bayyana
Ƙararrawa na waje A11 Ƙararrawa daga siginar ƙararrawa na waje, koma zuwa lambar siga na ciki "F50"
A21 Laifin firikwensin raɓa Ma'aunin firikwensin raɓa ya karye-layi ko gajeriyar kewayawa (Nuna zafin raɓa "OPE" ko "SHr")
Laifin firikwensin ƙwanƙwasa A22 Ƙarƙashin layin da aka karya ko gajeriyar kewayawa (Latsa "" zai nuna "SHr" ko "OPE")
A31 Laifin zafin raɓa Idan ƙararrawa ya faru a cikin zafin raɓa sama da ƙimar da aka saita, zai iya zaɓar ko rufewa ko a'a (F51).
Ƙararrawar zafin raɓa ba za ta faru ba lokacin da compressor ya fara cikin mintuna biyar.
A32 Laifin zafin jiki Idan ƙararrawa ya faru a cikin yanayin zafi sama da ƙimar da aka saita, zai iya zaɓar ko rufewa ko a'a.(F52)
2.3 Nunin zafin jiki
Bayan iko akan gwajin kai, LED ɗin yana nuna ƙimar zafin raɓa.Lokacin danna "", zai nuna yanayin zafin na'urar.Juyawa zai dawo don nuna zafin raɓa.
2.4 Tarin nunin lokutan aiki
Danna "" a lokaci guda, zai nuna kwampressor da aka tara lokacin aiki.Raka'a: hours
2.5 Babban matakin aiki
Dogon danna "M" 5 seconds don shigar da yanayin saitin sigina.Idan kun saita umarni, zai nuna kalmar "PAS" don alamar shigo da umarnin.Yin amfani da latsa “”don shigo da umarni.Idan lambar tayi daidai, zata nuna lambar siga.Lambar siga kamar tebur mai biyowa:
Sunan Sigar Lambar Rukuni Saitin kewayon Saitin Factory Alamar Sashin
Zazzabi F11 wurin faɗakarwar zafin raɓa 10 – 45 20 ℃ Zai yi gargaɗi lokacin da zafin jiki ya zarce ƙimar da aka saita.
F12 Matsayin faɗakarwa zafin zafi 42 – 70 65 ℃
F18 Gyara firikwensin Dew-point -20.0 - 20.0 0.0 ℃ Gyara kuskuren firikwensin raɓa
F19 Gyaran firikwensin firikwensin -20.0 - 20.0 0.0 ℃ Gyara kuskuren firikwensin firikwensin
Lokacin jinkirin firikwensin F21 0.0 - 10.0 Minti 1.0
Fan/Antifreezing F31 Fara maganin daskarewa buƙatar zafin jiki -5.0 – 10.0 2.0 ℃ Zai fara lokacin da zafin raɓa ya yi ƙasa da ƙimar da aka saita.
F32 Bambancin dawowar daskarewa 1 – 5 2.0 ℃ Zai tsaya lokacin da zafin raɓa ya fi F31+F32.
F41 Hanya ta biyu yanayin fitarwa.KASHE
1-3 1 - KASHE: makusanci
1. Fan da ke ƙarƙashin kulawar zafin jiki.
2. Fan yayi aiki a lokaci guda tare da compressor.
3. Yanayin fitar da sanyi.
F42 Fan fara zafin jiki 32 – 55 42 ℃ Zai fara lokacin da yanayin zafi ya fi yadda aka saita.Zai rufe lokacin da ƙasa da saita bambancin dawowa.
F43 Fan kusancin dawowar zafin jiki.0.5 - 10.0 2.0 ℃
Ƙararrawa F50 Yanayin ƙararrawa na waje 0 - 4 4 - 0: ba tare da ƙararrawa na waje ba
1: kullum a bude, a bude
2: kullum a bude, kulle
3: ko da yaushe a rufe, a buɗe
4: kullum rufe, kulle
F51 Hanyar magance ƙararrawar zafin raɓa.0 - 1 0 - 0: Ƙararrawa kawai, ba kusa ba.
1: Ƙararrawa da rufewa.
F52 Hanyar ma'amala da ƙararrawar zafin jiki.0 - 1 1 - 0: Ƙararrawa kawai, ba kusa ba.
1: Ƙararrawa da rufewa.
Tsarin yana nufin F80 Password KASHE
0001 - 9999 - - KASHE yana nufin babu kalmar sirri
0000 Tsarin yana nufin share kalmar sirri
F83 Canja wurin ƙwaƙwalwar yanayin inji YES - NO EE -
F85 Nuna compressor tara lokacin aiki - - Sa'a
F86 Sake saita kwampreso tara lokacin aiki.A'A - EE A'A - A'a: ba a sake saiti ba
YES: sake saiti
F88 An Ajiye
An Ajiye Gwajin F98
F99 Gwaji-kansa Wannan aikin na iya jawo hankalin duk relays bi da bi, kuma don Allah kar a yi amfani da shi lokacin da mai sarrafawa ke gudana!
Ƙarshen Fitowa
3 Tushen Aiki
3.1 Ikon kwampreso
Bayan an kunna mai sarrafawa, compressor zai jinkirta na ɗan lokaci don kare kansa (F21).Hasken mai nuna alama zai firgita a lokaci guda.Idan shigarwar waje da aka bincika yana da ban tsoro, compressor zai tsaya.
3.2 Fan iko
Tsohuwar fan a ƙarƙashin ikon sarrafa zafin jiki.Zai buɗe lokacin da zafin jiki ya fi (gami da) saiti (F42), rufewa lokacin da ƙasa da wurin da aka saita - bambancin dawowa (F43) .Idan firikwensin raɗaɗi ya gaza, fitowar fan tare da kwampreso.
3.3 Ƙararrawa na waje
Lokacin da ƙararrawar waje ta faru, dakatar da kwampreso da fan.Siginar ƙararrawa na waje yana da hanyoyi 5 (F50): 0: ba tare da ƙararrawa na waje ba, 1: koyaushe buɗewa, buɗewa, 2: koyaushe buɗewa, kulle;3: kullum a rufe, a buɗe;4: kullum rufe, kulle."Buɗe koyaushe" yana nufin a cikin al'ada, siginar ƙararrawa na waje yana buɗe, idan an rufe, mai sarrafawa yana ƙararrawa;"Koyaushe rufe" akasin haka."Kulle" yana nufin cewa lokacin da siginar ƙararrawa ta waje ta zama al'ada, mai sarrafawa yana cikin yanayin ƙararrawa, kuma yana buƙatar danna kowane maɓalli don ci gaba.
3.4 Umurni
Domin hana kowane mutum canza sigogi, zaku iya saita kalmar sirri (F80), kuma idan kun saita kalmar wucewa, mai sarrafa zai nuna muku shigar da kalmar wucewa bayan kun danna maɓallin "M" na daƙiƙa 5, ku. dole ne ka shigar da kalmar sirri daidai, sannan zaka iya saita sigogi.Idan ba kwa buƙatar kalmar wucewa, zaku iya saita F80 zuwa “0000”.Lura cewa dole ne ku tuna kalmar sirri, kuma idan kun manta kalmar sirri, ba za ku iya shigar da yanayin da aka saita ba.
5 Bayanan kula
Da fatan za a yi amfani da firikwensin zafin jiki wanda kamfaninmu ya keɓe.
Idan ƙarfin kwampreso bai wuce 1.5HP ba, zai iya sarrafa kai tsaye ta hanyar gudu ta ciki.In ba haka ba kuna buƙatar haɗi ac contactor.
Fan wanda bai wuce 200w ba.
Lokacin aikawa: Nuwamba-28-2022
